FS 4 Martin Roboscan 1220 CMYR Scanner Lights

I am selling these lights because I haven't used them in over a year. To my knowledge I am the third owner of these lights.  Every gig that I brought them out for - they have totally rocked the house.  They are bright, fast and do lots of cool moving light things.

Some facts about the scanners:
>CMY color mixing
>4 rotating gobos (one rotating gobo is missing in each fixture, it will cost you $40ish
bucks to replace the gobo with a Rosco, Apollo, or Gam gobo [size e gobo])
>9 static gobos (non replaceable)
>motorized iris (one fixture's iris motor is starting to go out - you can manually open the
iris and disconnect the motor and leave it open, honestly I've never used the iris's)
>2 static color wheels per fixture (presently I took the color wheel modules out of each
fixture, I was hoping to flip flop parts to make one out of 2 color wheels work in each
fixture and give you 2 spare color wheel motors as 2 of the motors tend to stick)
>Full dimming
>super fast shutter for awesome strobing
>Additional effects wheel with a 3 facet prism, a 5 facet prism, and a frost filter.
>5500 lumens
>motorized focus
>4 DMX modes that will give you control of the fixtures using 15, 17, or 19 channels per
fixture
>the roadcases are super nice
>weight: 110 pounds - seriously
>size 44" x 18" x 11" in - they are big.
>each fixture requires its own 20 amp circuit
>1200 watt MSR discharge lamp (bright)

So yeah, these are big old intelligent lights I had a lot of fun with them and they made me
some money in the past.  I haven't done any shows this past year that has required big 1200 watt intelligent lights so they've been sitting.  I had them up at Murray Hill for like 3
months a couple years back and they looked amazing.  I don't have the storage for the
fixtures so they have to go.  I am selling these cheap because they need a little TLC to
make them 100% working again.  Right now you can plug these fixtures in - patch them to a DMX board and they will work fine minus the things I pointed out.  Even missing one gobo, and the 2 color wheels you can still make a great light show happen.   I want someone to buy these that has a basic idea of how these lights work and will probably install them somewhere like a club or a church.  You can still use these on the road but I wouldn't.  I had no problems using them at Murray Hill. 

I am asking for $600 for all 4 lights and roadcases. 

Despite all the shortcomings of the fixtues, you will not find 4 fixtures for $600 that has
rotating gobos, color mixing, dimming, prisms, and is super bright!  If you are aspiring
lighting guy you can take these to your garage, clean them up, hook them to a DMX controller of your choice (I have Martin Light Jockey but you can download Freestyler for free and buy a dongle for $75) and control these lights at your venue.  You will get more out of this $600 worth of lighting than purchasing 4 $150 DJ lights.  If you have the space, power, time, and drive to make a good light show then you need to get these lights.

Specs are here:

http://hjem.get2net.dk/Tazmaniac/1220.htm

Manual download here:

http://www.martin.com/Service/service.asp?dofind=yes&support=Martin

Payment through paypal.... I will ship but I have no idea how much that would cost.

I am in Jacksonville, Florida.

Pics:

I just sold the lights..... thanks everyone for the interest.   At some point I will go through my storage and get rid of some of my old sound active DJ lights....